CT200 Fuel Injector Ultrasonic Cleaning Machine Nozzle Cleaner Tester PK CNC602A

Description: Why Choose AUTOOL CT200 Automotive Injector Cleaner and Tester MachineThe CT 200 is an injector cleaner and tester machine that combines ultrasonic cleaning technology with oil pressure control cleaning and inspection technology. It can simulate various working conditions of the engine to clean and test the injectors. It can support 6-cylinder injectors at the same time, saving time, and efficiency. Also supports testing of fuel injectors for most cars and motorcycles in the market. Since its launch, AUTOOL CT200 model has been widely received and approved by professional auto repair technicians.How to choose test fluid?The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.How to choose cleaning fluid?Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough.Ultrasonic Cleaning It works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughlyReverse Cleaning & ON-Vehicle Cleaning Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only)Widely ApplicableAUTOOL CT200 Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support for HONDA YAMAHA SUZUKI SANYANG only)Applicable Voltage Applicable Voltage:Support 110V or 220V power input Multi-Progress: 6 injectors can be tested and cleaned at one time.Specifications Power Supply:110/220V Main unit dimensions:405*380*430MM Package weight:17.89KG Package dimensions:485*465*490MM Power of Ultrasonic Cleaning:70W Frequency of Ultrasonic Cleaning:28KHZ±0.5KHZPackage Includes: 1pc X AUTOOL CT200 Petrol Car Injector Tester Main Unit 2pcs X Valve (for discharging fluid from machine tank) 6pcs X Cleaning connector 6 pcs X Sealing ring 6pcs X Washer fittings 6pcs X Plugs 1pc X Ultrasonic cleaning bracket 1pc X Ultrasonic cleaning cover 1pc X Power cable 1pc X Funnel 1pc X Oil separator 2pcs X Pulse signal cable 2pcsX Fixing bolt 1 x Manual(English) AUTOOL CT200 New DesignTest level gaugeIt allows you to observe the amount of test fluid directly and clearly.It is used to display the output pressure of the fuel injector during testing, and to control the test fluid output state of the fuel injector by adjusting the pressure value.Pressure gaugeIt is used to display the filling amount of the test fluid, which allows you to observe the pressure during the test, and be careful not to add more than the maximum amount to avoid damage to the machine or the injector due to excessive pressure. Cleaning fluid & Test fluid recovery valve After the cleaning or tetsing is completed, the fluid needs to be recovered through the valve, which has the advantage of: 1. Damage will be caused to the product of the liquid is left inside the cleaning bath for a long time. 2. The recovered liquid can be reused, thus saving your cost.How does the CT200 work?Ultrasonic Cleaning:1. Add the cleaning fluid and put the injectors into the ultrasonic cleaning bath.2. Connect the pulse signal lines and select item 1 Ultrasonic Cleaning function to start.Injector Testing1. First add the test fluid, then install the injectors on the fuel distributor, and fix them with bolts.2. Different functions can be selected to test to see if any of the injectors are leaking or blocked.VISIT OUR STOREMORE PRODUCTSMORE PRODUCTS 3 WARRANTY&SERVICEDelivery DetailsVISIT OUR STORE MORE PRODUCTS MORE PRODUCTS 3 WARRANTY&SERVICE Delivery Details1.We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address. Please make sure it’s correct . This will help your product to be received safely and quickly! 2.International Buyers Please Note: 1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying. 2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand. 3. Any further queries, please don't hesitate to email us. Thank you

Price: 409 USD

Location: Bordentown, New Jersey

End Time: 2023-09-29T01:22:47.000Z

Shipping Cost: 0 USD