BERETTA STAMPEDE JOHN WAYNE SAA GRIPS ~ MAGNA-TUSK™ AGED IVORY

Description: Arizona Custom GripsBERETTA STAMPEDE(Beretta Model 1873 SINGLE ACTION ARMY STYLE REVOLVERS)~ Exclusive ~ MAGNA-TUSK™john wayne fingergrooveAged ivory GRIPSHand cut in the famous John Wayne Fingergroove style featured in many of his most famous Westerns, such as True Grit, The War Wagon, The Cowboys, and Rooster Cogburn. These grips are made out of our exclusive Magna-Tusk™ Ivory, then aged to perfection -- the highest quality grips of their type ever available. An exclusive of Arizona Custom Grips. ~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full instructions with illustrations are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 What these will fit:This auction is for a set of Genuine Magna-Tusk™ grips for the BERETTA STAMPEDE (Model 1873 Single Action Army SAA revolvers). What these will NOT fit: Please note that these grips are made to fit ONLY the BERETTA STAMPEDE Single Action revolvers, with the typical SAA “plowhandle” shaped gripframe, and will NOT fit any revolvers from other makers (such as Uberti, Pietta, Armi San Marco, Colt, Ruger, etc.). These grips will also NOT fit the Bisley, the Birdshead, the Thunderer, Thunderball, or the Lightning style revolvers, nor any of the Remington style revolvers such as the 1858, 1875, or 1890, from ANY maker, which use a completely different shaped gripframe. Please drop us an email if you have any questions, we are always happy to help. A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made numerous makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, as well as the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 10312000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density material developed exclusively for our premium grip production. Vastly superior to standard bonded ivory or stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: Unlike the lightweight artificial yellow plastic materials sometimes offered for sale, Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk Ivory. Grip blanks are then milled from this premium material, incorporating both CNC techniques for blanking and finishing techniques similar to those used in manufacturing the originals. They are then carefully aged with our exclusive aging process, incorporating concentrated UV light (the essential aging property in natural sunlight). Our process produces an authentic appearance and genuine patina which extends into the surface, just like real ivory or stag. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. Accept no substitutes. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their custom-stocked revolvers to the range or club, where the quality difference is immediately seen and appreciated by fellow shooters. Magna-Tusk grips have all the authenticity of the originals, with several improvements over original materials including increased durability, and are made to last a lifetime. They feature subtle but authentic color mottling, grain variegation, and other authentic minute details found on original old Ivory and aged Stag, as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 030120 Grip screw included with all grips. The photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!

Price: 109.95 USD

Location: Mesa, Arizona

End Time: 2024-02-05T18:07:49.000Z

Shipping Cost: 5.99 USD