Description: Epilog Summit 2000 Laser Engraver Instruction Manual Comes in good condition, No missing pages or major damage. Original issue from 1996, 91 pages. Here is a bunch of info you never asked for: (My Epilog Summit (3.3) only works from Windows Millenium and 98. Not consistently from WXP, but sporadic raster and vector combined does happen. I can't get it to work right w XP through Harvard Draw, Corel, Image Folio, Stika, DrawMagic or anything else I have. But Millenium is OK except for the advanced mapping to colors function is very difficult.When it does rarely accept a graphic from my XP system from CorelDraw Essentials or 8.0, it will allow complete control for photo etching -speed, power and shade mapping. It is the same driver for both my systems but the control panel page looks different in the 2 computers. The laser takes 45 seconds to initialize after power on. You can use a USB to Parallel adapter cable for your laptop or modern computer connection. The laser needs the old style printer connection. Test your laser by holding all 3 power/focus/speed buttons then power switch on- do this until homed. Let go and Close the lid. "Online" for lase, any other button for laser off. Should be an audible beep every few seconds while your laser is functioning. This is not a motion test -only laser firing.) *************************************************** Paypal is accepted Shipping $4.95, USA. Please check my history for your assurance.
Price: 14.95 USD
Location: Seattle, Washington
End Time: 2024-03-08T05:34:44.000Z
Shipping Cost: 4.95 USD
Product Images
Item Specifics
Restocking Fee: 20%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: CO2
Country/Region of Manufacture: United States
MPN: 2000-25A
Brand: Epilog
