Feuling Black Cap Vented Dipstick (3092)

Description: Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders which is a common issue with large displacement big bore engines Test results show a decrease in engine sump oil levels Two venting style options are available when installing dipstick Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU) If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand) When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright) Made in the U.S.A. Two venting style options when installing dipstick: 1) Use the 1/8 NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by). 2) Use quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil). For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail. The oil pick-up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank. Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders which is a common issue with large displacement big bore engines Test results show a decrease in engine sump oil levels Two venting style options are available when installing dipstick Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU) If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand) When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright) Made in the U.S.A. Two venting style options when installing dipstick: 1) Use the 1/8 NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by). 2) Use quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil). For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail. The oil pick-up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank. Compatible Vehicles YearsMakeModelNotes 2007-2013Harley-DavidsonElectra Glide Classic FLHTC 2007-2009Harley-DavidsonElectra Glide FLHT 2015-2016Harley-DavidsonElectra Glide Low Ultra Classic FLHTCUL 2015Harley-DavidsonElectra Glide Low Ultra Limited FLHTKL 2007-2016Harley-DavidsonElectra Glide Ultra Classic FLHTCU 2010-2015Harley-DavidsonElectra Glide Ultra Limited FLHTK 2015-2016Harley-DavidsonFreewheeler FLRT 2010-2013Harley-DavidsonRoad Glide Custom FLTRX 2007-2009Harley-DavidsonRoad Glide FLTR 2015-2016Harley-DavidsonRoad Glide FLTRX 2015-2016Harley-DavidsonRoad Glide Special FLTRXS 2011-2013Harley-DavidsonRoad Glide Ultra FLTRU 2016Harley-DavidsonRoad Glide Ultra FLTRU 2007-2013Harley-DavidsonRoad King Classic FLHRC 2007Harley-DavidsonRoad King Custom FLHRS 2007-2016Harley-DavidsonRoad King FLHR 2007-2016Harley-DavidsonStreet Glide FLHX 2014-2016Harley-DavidsonStreet Glide Special FLHXS 2010-2011Harley-DavidsonStreet Glide Trike FLHXXX 2009-2013Harley-DavidsonTri Glide Ultra Classic FLHTCUTG 2015Harley-DavidsonTri Glide Ultra Classic FLHTCUTG 2016Harley-DavidsonTri Glide Ultra FLHTCUTG 2014Harley-DavidsonTri Glide Ultra FLHTUTG 2016Harley-DavidsonUltra Limited FLHTK 2016Harley-DavidsonUltra Limited Low FLHTKL NOTE: Image may not be actual item and may differ depending on your vehicle fitment. Please do not make your purchase based on the picture. Contact us for more information. INTERNATIONAL CUSTOMERS: Before purchasing aftermarket parts for your bike, please confirm that your vehicle has USA-specified parts. If you have a non-USA vehicle, the manufacturer may have used different OEM parts to meet your countries standards. If this is the case, parts ordered from a USA retailer may not fit correctly. Compare the microfiche for the USA model to your model to be sure they are the same. Perf-moto is not responsible for fitment issues caused by non-USA models. All Taxes, Customs, and Duty fees for Internationally sent items are the responsibility of the buyer.. Unfortunately, we can not mark as gift or lower the value for international shipments. Sales tax is collected for Michigan residents and other states which require internet sales tax. Shipping to the USA will be with UPS, Fedex, USPS, or other trackable service. Shipping to all International countries will have tracking Remember, Customs and Duty Taxes for International purchases are the buyers responsibility. Please make sure you know the rules of your country before purchasing. All buyers are responsible for additional shipping and handling charges incurred due to an invalid or undeliverable shipping address. Customer Service: Our goal is provide you with the best and easiest internet purchasing experience. Feel free to contact us on eBay. Our hours are Monday thru Friday 9am-5pm (Eastern Standard Time USA). We try our best to answer all emails within 24 hours and any email sent after Friday 5pm will be answered the following Monday. Feedback & DSR ratings:; We are committed to providing a great online shopping experience. Please contact us with any questions or concerns before you leave feedback and we will be happy to help. back to top 3549620

Price: 279.95 USD

Location: Holland, Michigan

End Time: 2024-12-21T16:40:38.000Z

Shipping Cost: 0 USD