RTK GPS GNSS Surveying Equipment with RTK Rover,Base, Collector,1cm Accuracy

Description: About this item【What is it】R26 v2 GNSS Surveying System with IMU, consists of R26 rover and base station and Collector with Surveying software. Double R26 RTK GNSS receiver included, which enables the system to pinpoint measurement and reference locations in a timely and accurate manner. This Survey system is mainly for construction and geodetic surveys or layout planning.【How to work】step 1:Connect collector with one R26 by BT to set as base, wait for 3minutes(important) , step2:stop connection with base, then connect collector with other R26 to set as rover. Step 3: Set same wireless protocol "CCS" and channel on rover and base till fixed. Then you can start parameter setting and surveying job.【Where to use】 Accuracy RTK GNSS receiver R26 can meet various surveying & engineering, such as surveying and mapping engineering, geographic information, engineering surveying, mine surveying etc. Fully support GPS, GLONASS, Galileo systems, adapt to a variety of complex and harsh environments【Why to use】 Built-in BT, wireless , storage, positioning,inertial navigation, antenna and other modules to meet various needs of measurement work. Built-in low-power transceiver integrated wireless module and IMU. It employs a base station and rover with the (GPS) to attain centimeter-level precision measurement. Collector with professional instruction,High precision, low power consumption, small size, easy to carry and operate.【Software】Surveying software installed in Handheld(Collector) and Permanently Valid. Software download link is always available for user to update the latest software.【Tech Support】For sure buyer can ontact seller tech team for support to make sure the equipments 100% work well.Please email for technical support or Search for SMAJAYU on YouTube. How to Work? Survey StepsPlease note that：When you receive the new R26 device.Long press the power button to turn it on.If the light does not respond, or the light flickers for a while and then goes out.It means that the device is out of power.Please connect the adapter to charge it.Technology in Surveying: Real-Time Kinematic (RTK) GPSThe use of RTK survey GPS equipment represents the leading edge of innovation in the surveying industry. This device makes use of a real-time kinematic (RTK) GPS, which enables it to pinpoint measurement and reference locations in a timely and accurate manner. RTK GPS survey equipment, such as SMAJAYU, does not need processing after the survey has been finished. It allows for instant response to be provided in the field, giving data on accuracy and quality testing without the need to analyze the survey or return to the area for a do-over. This kind of surveying is advantageous for surveyors since it may be used for both level 3 and level 4 surveys at the same time.How does RTK survey GPS work?Real-time surveys conduct using RTK GPS survey equipment with either a dual frequency, but the BDS（BDS B1l/B2l/B3l/B1C/B2a/B2b）; GPS（L1C/A/L2P(Y)/L2C/L5）; GLONASS（G1/G2/G3）; Galileo（E1/E5a/E5b/E6*）; QZSS（L1,L2,L5）carrier phase is always employed to bring the survey to its successful conclusion. Due to the frequency capabilities, this indicates that RTK surveys can only be undertaken within a radius of around 5 kilometers (km) from the base.On the other hand, there are occasions when the whole range is employed for the survey, which necessitates shorter distances in order to keep the accuracy level at 1 centimeter. Utilizing a GPS system is both time and labor-saving, but there is uncertain that the outcomes will match your expectations.When doing a survey using RTK GPS technology, a surveyor is limited in what they can accomplish according to the number and location of satellites that are accessible on that particular day. The need to rearrange your calendar to accommodate the satellites may seem to be an additional strain, yet, doing so will really result in an increase in both your productivity and effectiveness.LARGE CAPACITY AND LONG BATTERY LIFE：Built-in battery with a capacity of up to 10200mAh, which can achieve more than 14 hours of continuous battery life, ensuring longterm operation in harsh outdoor environmentsBUILT-IN UHF Wireless：Built-in low-power transceiver integrated wireless module, which can realize automatic switching between mobile station and base stationWireless PROTOCOL：CSS (Lora) ProtocolSIGNAL TRACKING：Channels 1408 channels，base on NebulasIV Q&A Q:Do i need a subscription to any satellite service? A:No need Additional subscription. RTK base station included. The complete system including Rover, base and collector. Q:Does this system require a moble hotspot to connect to the internet for CORS or Tcp/IP Corrections ? A:Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.lf you use a wireless base station(R26 V2 base) for calibration, there is no need for a mobile hotspot. Q:Does it include software? Will it work out of the USA?A:Ths system incuding rovertbasetcollecto.The software intllation is already in the collector and is permanently valid.lt can works in US and out of US. Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot.Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot.Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot.Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot.Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot.Yes, if you use CORS or TCP/IP correction, you will need a mobile hotspot to connect.If you use a wireless base station (R26 V2 base) for calibration, there is no need for a mobile hotspot No need Additional subscription. RTK base station included. The complete system including Rover, base and collector.

Price: 3103 USD

Location: Houston, Texas

End Time: 2024-08-05T11:08:17.000Z

Shipping Cost: 0 USD